AFS Aluminio Fachadas Sistemas Internacionales S.A.S.
Our black-out systems from AFS can be used to completely darken areas such as laboratories, X-ray rooms, operating theatres, schools, auditoriums and meeting rooms.
Vertical black-out systems
Vertical black-out systems can black out rooms completely.
The units can be configured as left or right rolling blinds, and the black-out blind itself is available in a textile, Soltis or glass fibre material.
The sloped inspection cover gives the box a smaller appearance.
If desired, a rear ventilation profile can be installed behind the guide rails or on the box.
This ventilation profile is made of extruded aluminium (28 x 9.5 mm) and powder-coated in RAL 9005 matt black.
Horizontal black-out blind
This product is used to completely block out light on horizontal surfaces, e.g. in skylight domes.
The horizontal black-out blind is motor-driven with a toothed-belt drive that is incorporated
in the box.
Black-out blinds with ZIP guidance
Black-out blinds with ZIP guidance from AFS are particularly well-suited for dimming-out rooms with slender transom and mullion facades.
Narrow guide rails and the absence of stiffener rods lend the blinds an appealing appearance.
VDA-ZIP dim-out with zipper system and without stiffener rods
Rectangular, made of extruded aluminium.
2- Inspection cover
Made of extruded aluminium.
3. Black-out blind
Resistant polyester fabric (Soltis fabric B92), with PVC coating outside and inside, without stiffener rods.
Colours as per WAREMA colour chart for black-out blinds
Curtain is flame resistant as per DIN 4102-1 B1
4. Guide rails
Two-piece, made of extruded aluminium, with narrow face width (25–56 mm).
5. ZIP guidance
6. Zipper on black-out blind is guided by plastic core in guide rail.
7. End rail
Includes sealing strip, closes flush with box.
Sealing strip made of plastic.
© Copyright 2017. All Rights Reserved