AFS Aluminio Fachadas Sistemas Internacionales S.A.S.
_________________________________
Sistemas de Proteccion Solar
Bogota-Colombia
Horizontal awnings
Horizontal awnings
Horizontal awnings from AFS are used for shading large areas
on glass constructions.
Horizontal awnings types H1 and H2
Rolled horizontal awnings.
H1: Stainless steel support cable, Ø 6 mm, with transparent plastic sheath, 8 mm total diameter.
Type H2: Guide rails made of extruded aluminium. The single guide rail measures 25 x 30 mm
or 20 x 40 mm.
Characteristics
Substance Soltis 92
Max. Failure 10000 mm
Max. Awning width 4500 mm
Min. Awning width 1000 mm
Max. Awning area 30 m²
Max. Inclination for movement from top to down 30 °
Max. Inclination on extension from bottom to top 15 °
Notes
The construction limit values specified above only apply when using a fabric shaft with ø 120x3 mm.
Smaller fabric shaft diameters result in smaller maximum values.
Only as an individual unit model – mechanical coupling of awnings is cannot possible.
Cable force per fixing point: 6 kN (only for type H1).
A folded cover panel is optionally available depending on the structural conditions.
Horizontal awnings types H3 and H4
Horizontal awnings with gathered fabric.
Horizontal bands of fabric supported between transverse support rods are guided using stainless steel cords or guide rails and gathered in folds.
Guides
Type H3: Stainless steel support cable, Ø 6 mm, with transparent plastic sheath, 8 mm total diameter.
Type H4: Guide rails made of extruded aluminium. The single guide rail measures 25 x 30 mm
or 20 x 40 mm.
Characteristics
Substance Soltis 92
Max. Failure 10000 mm
Max. Awning width 4000 mm
Min. Awning width 1000 mm
Max. Awning area 30 m²
Max. Inclination at upwards movement from top to down 0 °.
Max. Inclination on extension from bottom to top 5 °.
Notes
The construction limit values apply for gathering on one side.
Alternatively, the gathering can be arranged on two sides, with each gathering closing toward
the centre.
The blinds cannot be coupled mechanically.
They can only be used individually.
Cable force per fixing point 6 kN (only for type H3).